Festo EMMB-ST Stepper Motors
Festo EMMB-ST Stepper Motors are designed for applications with basic requirements, such as machine builders in electronics, basic automation, and light assembly. These cost-effective devices can be combined with the CMMT-ST-MP servo drive controller to create an ideal servo system. The EMMB-ST series offers a simple and space-saving connection via Festo's one-cable plug (OCP) hybrid cable, which features a common motor and connection cable for both the supply and the encoder. An additional feature is the "electronic rating plate," which contains a motor correction table for precise control. The table also enables the motor to be optimally adjusted to achieve the desired performance. Festo EMMB-ST Stepper Motors feature IP40 protection for the motor shaft and IP65 for the motor housing, including connection technology.
Features
- Basic series for applications with basic requirements
- Available with or without encoder
- Available with holding brake
- Robust connection technology
- Automatic motor detection via "electronic rating plate" with motor correction table
- OCP cable with space-saving plug, can be positioned to the front or rear
- Cable length up to 25m
- Digital absolute encoder system
- Single turn
- Multi-turn
- Application range down to -15°C possible
- Fits perfectly into Festo's product portfolio of electromechanical actuators, motors, drive controllers, and control systems
Applications
- Machine builders
- Electronics
- Light assembly
- Basic automation
Specifications
- 2-phase hybrid technology
- 3 flange sizes available: 0.25Nm to 6.6Nm minimum holding torque
- 1.8A to 7.5A current rating
- 0.035kg/cm2 to 2.016kg/cm2 rotor inertia range
- Degree of protection
- IP20 (motor housing with connection technology)
- IP40 (motor shaft)
Electrical Connection
