All Results (586)

Acceleration Sensor Modules Side exit, general purpose, low profile, case isolated, 100 mV/g, +/-15% sensitivity tolerance, 10 integral shielded twisted-pair cable, IP68, polyurethane jacket

Vibration Sensors Top exit, 105 C, 4-20 mA ( 5% @ full scale) proportional to Velocity, Equivalent Peak, 5.0 ips (127 mm/sec), 1/4-28 mounting hole (stud included), MIL-C-5015 connector.

Acceleration Sensor Modules Top exit, compact, seismic, high sensitivity/low frequency, microdot connector, case grounded, 10 V/g, +/-10% sensitivity tolerance, M4 mounting thread

Sensor Cables / Actuator Cables MIL-C-5015, 2 socket, IP 66, non-isolated, adapter ring 80082-01 required, blunt cut, twisted pair, braided shield, yellow, Teflon jacket, 64 ft.

Vibration Sensors Top exit, 85 C, 4-20 mA ( 5% @ full scale) proportional to Velocity, Equivalent Peak, 5.0 ips (127 mm/sec), MIL-C-5015 connector.

Accelerometers Embedded accelerometer; 100 mV/g sensitivity, +/- 5 tolerance; 180 W power consumption, 60 A very low current draw, operates down to 3 VDC; TO5 standard housing, .36" x .38", 304L stainless steel case; weighs 3.2 grams

Acceleration Sensor Modules Top exit, low noise, low frequency (0.1 Hz), MIL-C-5015 connector, 500 mV/g, +/-5% sensitivity tolerance

Sensor Fixings & Accessories Sensor Solution Kit: 4x 786A sensors, 4x R6Q-0-J9T2A-32 cables, 1x CB4 junction box, and mounting accessories

Acceleration Sensor Modules Top exit, low frequency (0.2 Hz), case isolated, 500 mV/g, +/-5% sensitivity tolerance, MIL-C-5015 connector

Sensor Cables / Actuator Cables Accelerometer cable assembly: 3 socket MIL-C-5015 style high temperature Viton B boot sensor connector; 3 pin MIL-C-5015 style termination connector suitable for use in Class I Div 2 (ATEX Zone 2) hazardous areas; 10ft 3-conductor cable with yellow T

Vibration Sensors RMS/PEAK ACELERATION LOOP SNSR

Acceleration Sensor Modules Side exit, general purpose, 100 mV/g, +/-5% sensitivity tolerance, MIL-C-5015 connector, 1/4-28 captive screw