|
|
SparkFun Accessories This is a simple three wire cable. Great for jumping from board to board or just about anything else. There is a 3-pin JST connector on one end bare cable on the opposite end. It also comes with the mating connector for the JST.
- PRT-09915
- SparkFun
-
1:
12,53 kr.
-
16In Stock
-
30Expected 15/09/2026
|
Mouser Part No
474-PRT-09915
|
SparkFun
|
SparkFun Accessories This is a simple three wire cable. Great for jumping from board to board or just about anything else. There is a 3-pin JST connector on one end bare cable on the opposite end. It also comes with the mating connector for the JST.
|
|
16In Stock
30Expected 15/09/2026
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Accessories Copper tape has countless applications in electronics from creating low-profile traces for electrical components to RF-shielding and antenna-making. Copper tape is even used to join things together using solder like the stained glass on Tiffany lamp
- PRT-10561
- SparkFun
-
1:
40,73 kr.
-
110In Stock
|
Mouser Part No
474-PRT-10561
|
SparkFun
|
SparkFun Accessories Copper tape has countless applications in electronics from creating low-profile traces for electrical components to RF-shielding and antenna-making. Copper tape is even used to join things together using solder like the stained glass on Tiffany lamp
|
|
110In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Accessories These are standard 0.1" spaced header pins that can be through-hole mounted. This header connects perfectly with most 6-pin male headers.This is a 6-Pin female header.Documents:Datasheet
- PRT-11894
- SparkFun
-
1:
5,13 kr.
-
94In Stock
|
Mouser Part No
474-PRT-11894
|
SparkFun
|
SparkFun Accessories These are standard 0.1" spaced header pins that can be through-hole mounted. This header connects perfectly with most 6-pin male headers.This is a 6-Pin female header.Documents:Datasheet
|
|
94In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Accessories This is a 2x23 pin male PTH header. This piece is in the common configuration for Beaglebone Black headers that can be broken apart to form smaller header formations. Each pin has a spacing of 0.1" in between each other.Documents:Datasheet
- PRT-12791
- SparkFun
-
1:
8,58 kr.
-
12In Stock
|
Mouser Part No
474-PRT-12791
|
SparkFun
|
SparkFun Accessories This is a 2x23 pin male PTH header. This piece is in the common configuration for Beaglebone Black headers that can be broken apart to form smaller header formations. Each pin has a spacing of 0.1" in between each other.Documents:Datasheet
|
|
12In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Accessories You'll have no need for a screwdriver with this terminal! This is a 3-pin Latch Terminal with 5mm pitch pins. Each pin is rated up to 250V @ 11A and will line up well with the standard 0.19" spacing. Please note that the pins are thick enough (1.20mm
- PRT-15899
- SparkFun
-
1:
12,16 kr.
-
7In Stock
|
Mouser Part No
474-PRT-15899
|
SparkFun
|
SparkFun Accessories You'll have no need for a screwdriver with this terminal! This is a 3-pin Latch Terminal with 5mm pitch pins. Each pin is rated up to 250V @ 11A and will line up well with the standard 0.19" spacing. Please note that the pins are thick enough (1.20mm
|
|
7In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Accessories This is your basic spool of lead free solder with a water soluble resin core. 0.031" gauge and 100 grams. This is a good spool for more advanced users that should last 6-12 months depending on how often you solder. If you are just beginning to solde
- TOL-09325
- SparkFun
-
1:
104,29 kr.
-
2In Stock
|
Mouser Part No
474-TOL-09325
|
SparkFun
|
SparkFun Accessories This is your basic spool of lead free solder with a water soluble resin core. 0.031" gauge and 100 grams. This is a good spool for more advanced users that should last 6-12 months depending on how often you solder. If you are just beginning to solde
|
|
2In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Accessories These needle tipped multimeter probes are great for attaching to multimeters power supplies oscilloscopes function generators etc. Not only can these make a good replacement for any multimeter probes you have now that are damaged or worn but tha
- TOL-12078
- SparkFun
-
1:
44,61 kr.
-
8In Stock
-
32Expected 28/10/2026
|
Mouser Part No
474-TOL-12078
|
SparkFun
|
SparkFun Accessories These needle tipped multimeter probes are great for attaching to multimeters power supplies oscilloscopes function generators etc. Not only can these make a good replacement for any multimeter probes you have now that are damaged or worn but tha
|
|
8In Stock
32Expected 28/10/2026
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Accessories USB 2.0 type A to micro USB 5-pin. This is a new smaller connector for USB devices. Micro USB connectors are about half the height of mini USB. Micro USB is found on newer hand held devices like cell phones and portable media devices. Works great wi
- CAB-10215
- SparkFun
-
1:
49,24 kr.
-
4In Stock
|
Mouser Part No
474-CAB-10215
|
SparkFun
|
SparkFun Accessories USB 2.0 type A to micro USB 5-pin. This is a new smaller connector for USB devices. Micro USB connectors are about half the height of mini USB. Micro USB is found on newer hand held devices like cell phones and portable media devices. Works great wi
|
|
4In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Accessories This is a translucent silicon rubber button pad with 4 buttons orignally inspired by the folks at monome.org. Each button has a hole underneath that accepts either a 3mm or 5mm standard LED. The idea is that you can create a button interface of your
- COM-07836
- SparkFun
-
1:
14,47 kr.
-
18In Stock
|
Mouser Part No
474-COM-07836
|
SparkFun
|
SparkFun Accessories This is a translucent silicon rubber button pad with 4 buttons orignally inspired by the folks at monome.org. Each button has a hole underneath that accepts either a 3mm or 5mm standard LED. The idea is that you can create a button interface of your
|
|
18In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Accessories This is a small 12mm round speaker that operates around the audible 2kHz range. You can use these speakers to create simple music or user interfaces. This is not a true piezoelectric speaker but behaves similarly. Instead of a piezoelectric crystal t
- COM-07950
- SparkFun
-
1:
16,04 kr.
-
19In Stock
|
Mouser Part No
474-COM-07950
|
SparkFun
|
SparkFun Accessories This is a small 12mm round speaker that operates around the audible 2kHz range. You can use these speakers to create simple music or user interfaces. This is not a true piezoelectric speaker but behaves similarly. Instead of a piezoelectric crystal t
|
|
19In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Accessories This is a very simple clear infrared LED. These devices operate between 940-950nm and work well for generic IR systems including remote control and touch-less object sensing. Pair them with any of our IR receivers (see Related Items below). 1.5VDC f
- COM-09349
- SparkFun
-
1:
9,62 kr.
-
30In Stock
|
Mouser Part No
474-COM-09349
|
SparkFun
|
SparkFun Accessories This is a very simple clear infrared LED. These devices operate between 940-950nm and work well for generic IR systems including remote control and touch-less object sensing. Pair them with any of our IR receivers (see Related Items below). 1.5VDC f
|
|
30In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Accessories Check out these big 10mm through-hole LEDs! The opaque epoxy package causes these LEDs to have a soft diffuse glow.Features:465-470nm Blue3.0-3.4VDC Forward Voltage20mA Forward Current40 degree viewing angle100-150 MCD outputDocuments:[Datasheet](ht
- COM-10635
- SparkFun
-
1:
6,48 kr.
-
22In Stock
|
Mouser Part No
474-COM-10635
|
SparkFun
|
SparkFun Accessories Check out these big 10mm through-hole LEDs! The opaque epoxy package causes these LEDs to have a soft diffuse glow.Features:465-470nm Blue3.0-3.4VDC Forward Voltage20mA Forward Current40 degree viewing angle100-150 MCD outputDocuments:[Datasheet](ht
|
|
22In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Accessories PICAXE-08M2 microcontroller chip.PICAXE is a neat entry-level microcontroller system that is relatively cheap to get started with. The chip is programmed with a simple serial connection and the BASIC development environment is free! PICAXE has some e
- COM-10803
- SparkFun
-
1:
26,56 kr.
-
169In Stock
|
Mouser Part No
474-COM-10803
|
SparkFun
|
SparkFun Accessories PICAXE-08M2 microcontroller chip.PICAXE is a neat entry-level microcontroller system that is relatively cheap to get started with. The chip is programmed with a simple serial connection and the BASIC development environment is free! PICAXE has some e
|
|
169In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Accessories Huge 10mm through-hole LEDs. Mood-light an entire wall!Features:3.0-3.4VDC Forward Voltage80mA Forward Current30 degree viewing angle16 000-20 000 MCD outputDocuments:DatasheetLED Tutorial
- COM-11118
- SparkFun
-
1:
26,86 kr.
-
8In Stock
|
Mouser Part No
474-COM-11118
|
SparkFun
|
SparkFun Accessories Huge 10mm through-hole LEDs. Mood-light an entire wall!Features:3.0-3.4VDC Forward Voltage80mA Forward Current30 degree viewing angle16 000-20 000 MCD outputDocuments:DatasheetLED Tutorial
|
|
8In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Accessories A simple slide potentiometer can go a long way. Rated at 10KOhm and 0.1W. Comes with solder tab connections. The pot has an overall travel of 30mm and has two mounting holes on top.Dimensions: 9.5mm x 45mmDocuments:Datasheet (C3031N-1A2-B10K-GP)
- COM-11621
- SparkFun
-
1:
9,18 kr.
-
31In Stock
|
Mouser Part No
474-COM-11621
|
SparkFun
|
SparkFun Accessories A simple slide potentiometer can go a long way. Rated at 10KOhm and 0.1W. Comes with solder tab connections. The pot has an overall travel of 30mm and has two mounting holes on top.Dimensions: 9.5mm x 45mmDocuments:Datasheet (C3031N-1A2-B10K-GP)
|
|
31In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Accessories This is a perfect choice if you are in need of a heavy duty push button! These metal push buttons are a very tough small panel-mount latching switch with an illuminated red LED ring. It is a SPDT with 16mm threading and 1mm pitch. This button is pe
- COM-11971
- SparkFun
-
1:
75,42 kr.
-
4In Stock
|
Mouser Part No
474-COM-11971
|
SparkFun
|
SparkFun Accessories This is a perfect choice if you are in need of a heavy duty push button! These metal push buttons are a very tough small panel-mount latching switch with an illuminated red LED ring. It is a SPDT with 16mm threading and 1mm pitch. This button is pe
|
|
4In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Accessories The Molex GNSS Flex antenna is a great option for basic GNSS applications and will work with any of our GNSS boards equipped with a U.FL at a fraction of the cost of many of its big brothers. This antenna supports GPS Galileo BeiDou and GLONASS in
- GPS-15246
- SparkFun
-
1:
46,77 kr.
-
25In Stock
|
Mouser Part No
474-GPS-15246
|
SparkFun
|
SparkFun Accessories The Molex GNSS Flex antenna is a great option for basic GNSS applications and will work with any of our GNSS boards equipped with a U.FL at a fraction of the cost of many of its big brothers. This antenna supports GPS Galileo BeiDou and GLONASS in
|
|
25In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Accessories DC power jack/connector. This is a common barrel-type power jack for DC wall supplies. These are compatible with our DC wall supplies and have a 5.5mm jack with a 2.1mm center pole diameter.Datasheets: Datasheet
- PRT-00119
- SparkFun
-
1:
13,28 kr.
-
265In Stock
|
Mouser Part No
474-PRT-00119
|
SparkFun
|
SparkFun Accessories DC power jack/connector. This is a common barrel-type power jack for DC wall supplies. These are compatible with our DC wall supplies and have a 5.5mm jack with a 2.1mm center pole diameter.Datasheets: Datasheet
|
|
265In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Accessories This is a time saving kit of jumper wires - cut stripped and pre-bent for your prototyping pleasure. Included with this kit are 14 various lengths of 22AWG wire - 2 5 7 10 12 15 17 20 22 25 50 75 100 and 125mm - 10 pieces of each.Inclu
- PRT-00124
- SparkFun
-
1:
62,81 kr.
-
47In Stock
|
Mouser Part No
474-PRT-00124
|
SparkFun
|
SparkFun Accessories This is a time saving kit of jumper wires - cut stripped and pre-bent for your prototyping pleasure. Included with this kit are 14 various lengths of 22AWG wire - 2 5 7 10 12 15 17 20 22 25 50 75 100 and 125mm - 10 pieces of each.Inclu
|
|
47In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Accessories Easily add a serial port to your project with this right-angle PCB-mount DE9 (also known as "DB9") female connector. It features the standard 0.318-inch mounting footprint making it a drop-in replacement or perfect for new designs. This durable con
- PRT-00429
- SparkFun
-
1:
14,47 kr.
-
59In Stock
|
Mouser Part No
474-PRT-00429
|
SparkFun
|
SparkFun Accessories Easily add a serial port to your project with this right-angle PCB-mount DE9 (also known as "DB9") female connector. It features the standard 0.318-inch mounting footprint making it a drop-in replacement or perfect for new designs. This durable con
|
|
59In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Accessories Jumper - 2 Pin
- PRT-09044
- SparkFun
-
1:
3,21 kr.
-
1.487In Stock
|
Mouser Part No
474-PRT-09044
|
SparkFun
|
SparkFun Accessories Jumper - 2 Pin
|
|
1.487In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Accessories This is a SparkFun exclusive! These are 12" long jumper wires terminated as male to female. Use these to jumper from any male or female header on any board. Multiple jumpers can be connected next to one another on a 0.1" header. Comes in one pack of
- PRT-09385
- SparkFun
-
1:
31,78 kr.
-
13In Stock
|
Mouser Part No
474-PRT-09385
|
SparkFun
|
SparkFun Accessories This is a SparkFun exclusive! These are 12" long jumper wires terminated as male to female. Use these to jumper from any male or female header on any board. Multiple jumpers can be connected next to one another on a 0.1" header. Comes in one pack of
|
|
13In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Accessories These nylon standoffs are 3/8" long and tapped for a 4-40 screw. These are great for mounting your board in an enclosure or just getting it up off the table. The black nylon will give your project a very sessy look.Sold in packs of 10. Check below f
- PRT-10927
- SparkFun
-
1:
24,10 kr.
-
12In Stock
|
Mouser Part No
474-PRT-10927
|
SparkFun
|
SparkFun Accessories These nylon standoffs are 3/8" long and tapped for a 4-40 screw. These are great for mounting your board in an enclosure or just getting it up off the table. The black nylon will give your project a very sessy look.Sold in packs of 10. Check below f
|
|
12In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Accessories Now for all of your coin cell battery surface mount needs the 20mm SMD Coin Cell Holder. This holder fits our 20mm Lithium Ion coin cell battery and holds the battery in place with friction. The metal housing connects to the positive (+) side of the
- PRT-11892
- SparkFun
-
1:
8,06 kr.
-
8In Stock
|
Mouser Part No
474-PRT-11892
|
SparkFun
|
SparkFun Accessories Now for all of your coin cell battery surface mount needs the 20mm SMD Coin Cell Holder. This holder fits our 20mm Lithium Ion coin cell battery and holds the battery in place with friction. The metal housing connects to the positive (+) side of the
|
|
8In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Accessories A simple constant current power supply that outputs 12.6VDC and 10A. It comes in a robust metal enclosure (IP68 rated) with a 100 000 hour service life. It features Over-voltage Over-current Short Circuit and Over-temperature safety features. This
- PRT-18722
- SparkFun
-
1:
331,60 kr.
-
2In Stock
|
Mouser Part No
474-PRT-18722
|
SparkFun
|
SparkFun Accessories A simple constant current power supply that outputs 12.6VDC and 10A. It comes in a robust metal enclosure (IP68 rated) with a 100 000 hour service life. It features Over-voltage Over-current Short Circuit and Over-temperature safety features. This
|
|
2In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
