|
|
Signal Conditioning The MMIQ-0416H is a high linearity, passive GaAs MMIC IQ mixer. This is an ultra-broadband mixer spanning 4 to 16 GHz on the RF and LO ports with an IF from DC to 6 GHz.
- MMIQ-0416HS
- Marki Microwave
-
1:
13.556,91 kr.
-
1Expected 23/10/2026
-
New At Mouser
|
Mouser Part No
10-MMIQ-0416HS
New At Mouser
|
Marki Microwave
|
Signal Conditioning The MMIQ-0416H is a high linearity, passive GaAs MMIC IQ mixer. This is an ultra-broadband mixer spanning 4 to 16 GHz on the RF and LO ports with an IF from DC to 6 GHz.
|
|
1Expected 23/10/2026
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Signal Conditioning A broadband balun, hand-tuned for optimal phase and amplitude balance over a 200 kHz to 10 GHz bandwidth.
- BAL-0010
- Marki Microwave
-
1:
7.117,36 kr.
-
1Expected 26/08/2026
-
New At Mouser
|
Mouser Part No
10-BAL-0010
New At Mouser
|
Marki Microwave
|
Signal Conditioning A broadband balun, hand-tuned for optimal phase and amplitude balance over a 200 kHz to 10 GHz bandwidth.
|
|
1Expected 26/08/2026
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Signal Conditioning The C13-0140 is a broadband 1-40 GHz, 13 dB directional coupler. The multisection tri-plate stripline design exhibits excellent coupling flatness and VSWR at all ports.
- C13-0140
- Marki Microwave
-
1:
8.182,65 kr.
-
1Expected 24/12/2026
-
New At Mouser
|
Mouser Part No
10-C13-0140
New At Mouser
|
Marki Microwave
|
Signal Conditioning The C13-0140 is a broadband 1-40 GHz, 13 dB directional coupler. The multisection tri-plate stripline design exhibits excellent coupling flatness and VSWR at all ports.
|
|
1Expected 24/12/2026
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Signal Conditioning 2-Way Wilkinson power dividers can be used for both in-phase power splitting and power combining applications.
- PD-0109
- Marki Microwave
-
1:
4.841,76 kr.
-
1Expected 20/10/2026
-
New At Mouser
|
Mouser Part No
10-PD-0109
New At Mouser
|
Marki Microwave
|
Signal Conditioning 2-Way Wilkinson power dividers can be used for both in-phase power splitting and power combining applications.
|
|
1Expected 20/10/2026
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Signal Conditioning This general purpose high pass filter offers high stop band suppression and low insertion loss in the passband. These filters can be used to eliminate unwanted side bands during up-conversion or for removing spurious interference and noise.
- FH-4000
- Marki Microwave
-
1:
7.714,46 kr.
-
1Expected 17/08/2026
-
New At Mouser
|
Mouser Part No
10-FH-4000
New At Mouser
|
Marki Microwave
|
Signal Conditioning This general purpose high pass filter offers high stop band suppression and low insertion loss in the passband. These filters can be used to eliminate unwanted side bands during up-conversion or for removing spurious interference and noise.
|
|
1Expected 17/08/2026
|
|
|
7.714,46 kr.
|
|
|
7.699,69 kr.
|
|
|
7.698,87 kr.
|
|
|
View
|
|
|
Quote
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Signal Conditioning The MM1-1857H is a passive double balanced MMIC mixer. It features excellent conversion loss, superior isolations and spurious performance across a broad bandwidth, in a highly miniaturized form factor.
- MM1-1857HS
- Marki Microwave
-
1:
6.729,96 kr.
-
1Expected 15/12/2026
-
New At Mouser
|
Mouser Part No
10-MM1-1857HS
New At Mouser
|
Marki Microwave
|
Signal Conditioning The MM1-1857H is a passive double balanced MMIC mixer. It features excellent conversion loss, superior isolations and spurious performance across a broad bandwidth, in a highly miniaturized form factor.
|
|
1Expected 15/12/2026
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Signal Conditioning A resistive 2-way power divider that features broadband operation from DC to 30 GHz. Resistive power dividers offer 6 dB nominal insertion loss and excellent amplitude and phase balance.
- PD-0030
- Marki Microwave
-
1:
4.790,96 kr.
-
1Expected 29/12/2026
-
New At Mouser
|
Mouser Part No
10-PD-0030
New At Mouser
|
Marki Microwave
|
Signal Conditioning A resistive 2-way power divider that features broadband operation from DC to 30 GHz. Resistive power dividers offer 6 dB nominal insertion loss and excellent amplitude and phase balance.
|
|
1Expected 29/12/2026
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Signal Conditioning A resistive 2-way power divider that features broadband operation from DC to 40 GHz. Resistive power dividers offer 6 dB nominal insertion loss and excellent amplitude and phase balance.
- PD-0040
- Marki Microwave
-
1:
4.793,27 kr.
-
1Expected 02/10/2026
-
New At Mouser
|
Mouser Part No
10-PD-0040
New At Mouser
|
Marki Microwave
|
Signal Conditioning A resistive 2-way power divider that features broadband operation from DC to 40 GHz. Resistive power dividers offer 6 dB nominal insertion loss and excellent amplitude and phase balance.
|
|
1Expected 02/10/2026
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Signal Conditioning 2-Way Wilkinson power dividers can be used for both in-phase power splitting and power combining applications.
- PD-0R510
- Marki Microwave
-
1:
5.810,07 kr.
-
1Expected 13/11/2026
-
New At Mouser
|
Mouser Part No
10-PD-0R510
New At Mouser
|
Marki Microwave
|
Signal Conditioning 2-Way Wilkinson power dividers can be used for both in-phase power splitting and power combining applications.
|
|
1Expected 13/11/2026
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Signal Conditioning The T3-1040G is a high performance mixer featuring LO/RF from 10 to 40 GHz and IF from 1 to 18 GHz.
- T3-1040GLN
- Marki Microwave
-
1:
11.571,80 kr.
-
Non-Stocked Lead-Time 12 Weeks
-
New At Mouser
|
Mouser Part No
10-T3-1040GLN
New At Mouser
|
Marki Microwave
|
Signal Conditioning The T3-1040G is a high performance mixer featuring LO/RF from 10 to 40 GHz and IF from 1 to 18 GHz.
|
|
Non-Stocked Lead-Time 12 Weeks
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Signal Conditioning A broadband MMIC LO buffer amplifier that is capable of producing at least +18 dBm up to 67 GHz. This amplifier can be used to drive L- or H-diode mixers from 35-67 GHz, or L- or H-diode IQ mixers from 35-60 GHz.
- A-3567UC
- Marki Microwave
-
1:
20.819,67 kr.
-
Non-Stocked Lead-Time 12 Weeks
-
New At Mouser
|
Mouser Part No
10-A-3567UC
New At Mouser
|
Marki Microwave
|
Signal Conditioning A broadband MMIC LO buffer amplifier that is capable of producing at least +18 dBm up to 67 GHz. This amplifier can be used to drive L- or H-diode mixers from 35-67 GHz, or L- or H-diode IQ mixers from 35-60 GHz.
|
|
Non-Stocked Lead-Time 12 Weeks
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Signal Conditioning The ADA-1030 can be used as a frequency extender to enhance the frequency range of a <15 GHz synthesizer up to 30 GHz. Useful for lab testing, test and measurement, and prototype systems.
- ADA-1030
- Marki Microwave
-
1:
8.666,80 kr.
-
Non-Stocked Lead-Time 12 Weeks
-
New At Mouser
|
Mouser Part No
10-ADA-1030
New At Mouser
|
Marki Microwave
|
Signal Conditioning The ADA-1030 can be used as a frequency extender to enhance the frequency range of a <15 GHz synthesizer up to 30 GHz. Useful for lab testing, test and measurement, and prototype systems.
|
|
Non-Stocked Lead-Time 12 Weeks
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Signal Conditioning A wideband low noise amplifier capable of providing 24 dB gain and a low 1.3 dB typical noise figure from 6 to 20 GHz. The ADM-8556 is an ideal linear signal amplifier for applications requiring low power consumption and small form-factors.
- ADM-8556PC
- Marki Microwave
-
1:
12.552,79 kr.
-
Non-Stocked Lead-Time 12 Weeks
-
New At Mouser
|
Mouser Part No
10-ADM-8556PC
New At Mouser
|
Marki Microwave
|
Signal Conditioning A wideband low noise amplifier capable of providing 24 dB gain and a low 1.3 dB typical noise figure from 6 to 20 GHz. The ADM-8556 is an ideal linear signal amplifier for applications requiring low power consumption and small form-factors.
|
|
Non-Stocked Lead-Time 12 Weeks
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Signal Conditioning The ADM-8558 is a wideband distributed low noise amplifier capable of providing 16 dB gain and +23 dBm OIP3 from 0.005 to 20 GHz and a low 1.8 dB typical noise figure from 7 to 15 GHz.
- ADM-8558PC
- Marki Microwave
-
1:
12.552,79 kr.
-
Non-Stocked Lead-Time 12 Weeks
-
New At Mouser
|
Mouser Part No
10-ADM-8558PC
New At Mouser
|
Marki Microwave
|
Signal Conditioning The ADM-8558 is a wideband distributed low noise amplifier capable of providing 16 dB gain and +23 dBm OIP3 from 0.005 to 20 GHz and a low 1.8 dB typical noise figure from 7 to 15 GHz.
|
|
Non-Stocked Lead-Time 12 Weeks
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Signal Conditioning A high-linearity low noise amplifier capable of providing 15 dB gain, 2.1 dB noise figure and +27 dBm OIP3 from 300 kHz to 10 GHz. It can serve either as a linear signal amplifier, or as a saturated driver amplifier for H- or S-diode mixers.
- ADM-8622PC
- Marki Microwave
-
1:
12.552,79 kr.
-
Non-Stocked Lead-Time 12 Weeks
-
New At Mouser
|
Mouser Part No
10-ADM-8622PC
New At Mouser
|
Marki Microwave
|
Signal Conditioning A high-linearity low noise amplifier capable of providing 15 dB gain, 2.1 dB noise figure and +27 dBm OIP3 from 300 kHz to 10 GHz. It can serve either as a linear signal amplifier, or as a saturated driver amplifier for H- or S-diode mixers.
|
|
Non-Stocked Lead-Time 12 Weeks
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Signal Conditioning A high-linearity, low noise amplifier capable of providing 10.5 dB gain and +26 dBm OIP3 across a broad 0.2-20 GHz bandwidth.
- ADM-8624PC
- Marki Microwave
-
1:
12.552,79 kr.
-
Non-Stocked Lead-Time 12 Weeks
-
New At Mouser
|
Mouser Part No
10-ADM-8624PC
New At Mouser
|
Marki Microwave
|
Signal Conditioning A high-linearity, low noise amplifier capable of providing 10.5 dB gain and +26 dBm OIP3 across a broad 0.2-20 GHz bandwidth.
|
|
Non-Stocked Lead-Time 12 Weeks
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Signal Conditioning The ADM-8625PC is a high-linearity low noise amplifier capable of providing 18 dB gain, 1.4 dB noise figure and +29 dBm OIP3 from 750 MHz to 8 GHz.
- ADM-8625PC
- Marki Microwave
-
1:
12.552,79 kr.
-
Non-Stocked Lead-Time 12 Weeks
-
New At Mouser
|
Mouser Part No
10-ADM-8625PC
New At Mouser
|
Marki Microwave
|
Signal Conditioning The ADM-8625PC is a high-linearity low noise amplifier capable of providing 18 dB gain, 1.4 dB noise figure and +29 dBm OIP3 from 750 MHz to 8 GHz.
|
|
Non-Stocked Lead-Time 12 Weeks
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Signal Conditioning A high-linearity, high gain, low noise distributed amplifier capable of providing +22dBm output power up to 35 GHz. When driven with an input power of 0 to +5 dBm, it can provide sufficient LO drive to power all H and most S diode mixers to 40GHz.
- ADM1-8007APC
- Marki Microwave
-
1:
12.552,79 kr.
-
Non-Stocked Lead-Time 12 Weeks
-
New Product
|
Mouser Part No
10-ADM1-8007APC
New Product
|
Marki Microwave
|
Signal Conditioning A high-linearity, high gain, low noise distributed amplifier capable of providing +22dBm output power up to 35 GHz. When driven with an input power of 0 to +5 dBm, it can provide sufficient LO drive to power all H and most S diode mixers to 40GHz.
|
|
Non-Stocked Lead-Time 12 Weeks
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Signal Conditioning A high-linearity amplifier capable of providing +18 dBm output power up to 10 GHz. The ADM1-8095PC can serve either as a linear signal amplifier, or as a saturated driver amplifier for H- or S-diode mixers.
- ADM1-8095PC
- Marki Microwave
-
1:
12.552,79 kr.
-
Non-Stocked Lead-Time 12 Weeks
-
New At Mouser
|
Mouser Part No
10-ADM1-8095PC
New At Mouser
|
Marki Microwave
|
Signal Conditioning A high-linearity amplifier capable of providing +18 dBm output power up to 10 GHz. The ADM1-8095PC can serve either as a linear signal amplifier, or as a saturated driver amplifier for H- or S-diode mixers.
|
|
Non-Stocked Lead-Time 12 Weeks
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
RF Adapters - In Series The ADPFKFK is a 2.92mm Female to 2.92mm Female straight angle coaxial adapter. This adapter features low insertion loss and low VSWR across a DC-40 GHz bandwidth. 3/8" torque wrench and 6 mm fixed wrench recommended.
- ADPFKFK
- Marki Microwave
-
1:
520,71 kr.
-
Non-Stocked Lead-Time 12 Weeks
-
New Product
|
Mouser Part No
10-ADPFKFK
New Product
|
Marki Microwave
|
RF Adapters - In Series The ADPFKFK is a 2.92mm Female to 2.92mm Female straight angle coaxial adapter. This adapter features low insertion loss and low VSWR across a DC-40 GHz bandwidth. 3/8" torque wrench and 6 mm fixed wrench recommended.
|
|
Non-Stocked Lead-Time 12 Weeks
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
RF Adapters - Between Series The ADPFVFK is a 2.4mm Female to 2.92mm Female straight angle coaxial adapter. This adapter features low insertion loss and low VSWR across a DC-40 GHz bandwidth. 3/8" torque wrench and 5.5 or 6 mm fixed wrench recommended.
- ADPFVFK
- Marki Microwave
-
1:
770,69 kr.
-
Non-Stocked Lead-Time 12 Weeks
-
New Product
|
Mouser Part No
10-ADPFVFK
New Product
|
Marki Microwave
|
RF Adapters - Between Series The ADPFVFK is a 2.4mm Female to 2.92mm Female straight angle coaxial adapter. This adapter features low insertion loss and low VSWR across a DC-40 GHz bandwidth. 3/8" torque wrench and 5.5 or 6 mm fixed wrench recommended.
|
|
Non-Stocked Lead-Time 12 Weeks
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
RF Adapters - In Series The ADPFVFV is a 2.4mm Female to 2.4mm Female straight angle coaxial adapter. This adapter features low insertion loss and low VSWR across a DC-50 GHz bandwidth. 3/8" torque wrench and 6 mm fixed wrench recommended.
- ADPFVFV
- Marki Microwave
-
1:
728,99 kr.
-
Non-Stocked Lead-Time 12 Weeks
-
New Product
|
Mouser Part No
10-ADPFVFV
New Product
|
Marki Microwave
|
RF Adapters - In Series The ADPFVFV is a 2.4mm Female to 2.4mm Female straight angle coaxial adapter. This adapter features low insertion loss and low VSWR across a DC-50 GHz bandwidth. 3/8" torque wrench and 6 mm fixed wrench recommended.
|
|
Non-Stocked Lead-Time 12 Weeks
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
RF Adapters - Between Series The ADPFVMK is a 2.4mm Female to 2.92mm Male straight angle coaxial adapter. This adapter features low insertion loss and low VSWR across a DC-40 GHz bandwidth. 3/8" torque wrench and 5.5 mm fixed wrench recommended.
- ADPFVMK
- Marki Microwave
-
1:
770,69 kr.
-
Non-Stocked Lead-Time 12 Weeks
-
New Product
|
Mouser Part No
10-ADPFVMK
New Product
|
Marki Microwave
|
RF Adapters - Between Series The ADPFVMK is a 2.4mm Female to 2.92mm Male straight angle coaxial adapter. This adapter features low insertion loss and low VSWR across a DC-40 GHz bandwidth. 3/8" torque wrench and 5.5 mm fixed wrench recommended.
|
|
Non-Stocked Lead-Time 12 Weeks
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
RF Adapters - In Series The ADPMKFK is a 2.92mm Male to 2.92mm Female straight angle coaxial adapter. This adapter features low insertion loss and low VSWR across a DC-40 GHz bandwidth. 3/8" torque wrench and 5.5 mm fixed wrench recommended.
- ADPMKFK
- Marki Microwave
-
1:
551,37 kr.
-
Non-Stocked Lead-Time 12 Weeks
-
New Product
|
Mouser Part No
10-ADPMKFK
New Product
|
Marki Microwave
|
RF Adapters - In Series The ADPMKFK is a 2.92mm Male to 2.92mm Female straight angle coaxial adapter. This adapter features low insertion loss and low VSWR across a DC-40 GHz bandwidth. 3/8" torque wrench and 5.5 mm fixed wrench recommended.
|
|
Non-Stocked Lead-Time 12 Weeks
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
RF Adapters - In Series The ADPMKMK is a 2.92mm Male to 2.92mm Male straight angle coaxial adapter. This adapter features low insertion loss and low VSWR across a DC-40 GHz bandwidth. 3/8" torque wrench and 5.5 mm fixed wrench recommended.
- ADPMKMK
- Marki Microwave
-
1:
551,37 kr.
-
Non-Stocked Lead-Time 12 Weeks
-
New Product
|
Mouser Part No
10-ADPMKMK
New Product
|
Marki Microwave
|
RF Adapters - In Series The ADPMKMK is a 2.92mm Male to 2.92mm Male straight angle coaxial adapter. This adapter features low insertion loss and low VSWR across a DC-40 GHz bandwidth. 3/8" torque wrench and 5.5 mm fixed wrench recommended.
|
|
Non-Stocked Lead-Time 12 Weeks
|
|
Min.: 1
Mult.: 1
|
|
|
